babycutters
115ml Hi-Tack Very Sticky PVA Glue | Waterless Transfer Paper Recommended Glue
115ml Hi-Tack Very Sticky PVA Glue | Waterless Transfer Paper Recommended Glue
Couldn't load pickup availability
Full instruction will be given on purchase with waterless transfer paper.
GETTING STARTED WITH WATERLESS SHEET:
1. Condition clay and roll onto a tile surface.
2. Apply a very thin even layer of "Hi-Tack "Very Sticky" Fast Track Glue adhesive on the surface of the clay.
3. Peel the backing paper out of the transfer paper
4. Place Transfer paper colourful side down onto clay surface.
5. Gently smooth into place with a roller or your fingers to remove any air bubbles.
6. Roll the transfer paper a few times, ensuring all surfaces of the paper are rolled down onto the clay.
7. Burnish the transfer paper for a few minute and around the corner for a few minutes and then quickly remove the small film like a band aid.
RECOMMENDED METHOD:
What do I need?
"Hi-Tack "Very Sticky" Fast Track Glue, tile, roller and polymer clay (Fimo, Sculpey)
Do I use water?
No. No water required.
Can I use with my cutters before baking?
Yes!
Do I need to seal these?
It is optional, if you like to have a vibrant glossy finish, then I suggest applying dura clear glossy varnish or a clear UV resin.
What else do I need to know?
Please note that image colours look different in person and will also change slightly upon baking, this is normal. Also, I do not recommend using Liquid Polymer clay or Oven-bake adhesive, as this will not always work. The best glue is "Hi-Tack "Very Sticky" Fast Tack Glue, fast drying" - when a thin layer is applied, the clay can be re-used, but if a thick layer is applied, the clay cannot be re-used as scrap.
Colour may change slightly when applied and baked.
Please be aware that pattern placement will vary.
Watermarks are not included in the sheets.
Sheet colours may vary between waterless and water soluble.
Applying resin to the finished pieces can really help add a vibrancy. More Process video can be viewed in instagram, under image transfer tutorial - @babyclaycutters
Materials
Materials
Material is made with PLA plastic or Biodegradable Resin.
Shipping & Returns
Shipping & Returns
We aim to ship out orders within 1-3 weeks, with the exception of product launch days. During launches please allow 3-4 weeks.
Orders will always be shipped prior to dispatched date.
Uk orders may arrive within 3-7 days / International orders within 2 weeks - 1 month
For Express shipping please, select DHL at checkout.
Dimensions
Dimensions
Size varies, please select from the list your desired size, they are measured by height and in mm and are approximate.
Care Instructions
Care Instructions
♡ For easy release of cutter, make sure to roll the clay gently onto surface first (e.g tile surface) to ensure the clay stick onto the surface then use cutter and press down on it.
♡ Washing recommendations:
- Not dishwasher friendly
- Hand-wash with lukewarm soapy water
- Use a clean soft cloth to wipe the edge after each use for a clean cut.
Share and tag us
We love to see what you made with our babycutters, please feel free to tag and share your lovely creation with us on instagram @babyclaycutters #babycutters
Follow us on instagram for updates!